مدل سازی دگرگونی تشکیل آستنیت در منطقه متاثر حرارتی جوش دو فولاد خط لوله X65 و X70

[1]     T. Gladman, “The Physical Metallurgy of Microalloyed Steels”, The Institute of Materials, London, 2002.

[2]       ع. ناظم الرعایا و م. فاضل نجف‌آبادی، "بررسی ریزساختار و خواص مکانیکی اتصال فولاد API-X65 به روش جوشکاری هم زن اصطکاکی"، شماره 4، زمستان 1394.

[3]     Y. Weng, H. Dong & Gan Y. (editors), “Advanced Steels the Recent Scenario in Steel Science and Technology”, Springer-Verlag, Berlin, 2011.

[4]     W. Sha, “Steels: From Materials Science to Structural Engineering”, Springer-Verlag, London, 2013.

[5]       ب. یوسفیان، ک. امینی و م. کثیری، "بررسی تاثیر سرعت سرد کردن، دمای پیشگرم و تغییر ترکیب شیمیایی بر روی ریز ساختار و خواص مکانیکی فولاد میکروآلیاژ وانادیوم دار متوسط کربن"، شماره 2، تابستان 1394.

[6]     K. Poorhaydari, B. M. Patchett & D. G. Ivey, “Estimation of Cooling Rate in the Welding of Plates with Intermediate Thickness”, Welding Journal, Vol. 84, pp. 149-155, 2005.

[7]     D. P. Dunne, “Review: Interaction of precipitation with recrystallisation and phase transformation in low alloy steels”, Materials Science and Technology, Vol. 26, No. 4, pp. 410-420, 2010.

[8]     P. R. Rios, “Relationship between non-isothermal transformation curves and isothermal and non-isothermal kinetics”, Acta Materialia, Vol. 53, No. 18, pp. 4893-4901, 2005.

[9]     L. M. Fu, H. R. Wang, W. Wang & A. D. Shan, “Austenite grain growth prediction coupling with drag and pinning effects in low carbon Nb microalloyed steels”, Materials Science and Technology, Vol. 27, No. 6, pp. 996-1001, 2011.

[10] M. Shome, D. S. Sarma, O. P. Gupta & O. N. Mohanty, “Precipitate dissolution and grain growth in the heat affected zone of HSLA-100 steel”, ISIJ International, Vol. 43, No. 9, pp. 1431-1437, 2003.

[11] Y. Q. Zhang, H. Q. Zhang, W. M. Liu & H. Hou, “Effects of Nb on microstructure and continuous cooling transformation of coarse grain heat-affected zone in 610 MPa class high-strength low-alloy structural steels”, Materials Science and Engineering, Vol. 499A, No. 1-2, pp. 182-186, 2009.

[12] C. García De Andrés, F. G. Caballero, C. Capdevila & L. F. Álvarez, “Application of dilatometric analysis to the study of solid-solid phase transformations in steels”, Materials Characterization, Vol. 48, No. 1, pp. 101-111, 2002.

[13] A. B. Cota, C. A. M. Lacerda, F. L. G. Oliveira, F. A. Machado & F. G. Da Silva Araújo, “Effect of the austenitizing temperature on the kinetics of ferritic grain growth under continuous cooling of a Nb microalloyed steel”, Scripta Materialia, Vol. 51, No. 7, pp. 721-725, 2004.

[14] F. L. G. Oliveira, M. S. Andrade & A. B. Cota, “Kinetics of austenite formation during continuous heating in a low carbon steel”, Materials Characterization, Vol. 58, No. 3, pp. 256-261, 2007.

[15] K. Banerjee, M. Militzer, M. Perez & X. Wang, “Nonisothermal austenite grain growth kinetics in a microalloyed x80 linepipe steel”, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 41, No. 12, pp. 3161-3172, 2010.

[16] M. Maalekian, R. Radis, M. Militzer, A. Moreau & W. J. Poole, “In situ measurement and modelling of austenite grain growth in a Ti/Nb microalloyed steel”, Acta Materialia, Vol. 60, pp. 1015–1026, 2012.

[17] S. Malinov, Z. Guo, W. Sha & A. Wilson, “Differential scanning calorimetry study and computer modeling of β ⇒ α phase transformation in a Ti-6Al-4V alloy”, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 32, No. 4, pp. 879-887, 2001.

[18] M. Militzer, R. Pandi & E. B. Hawbolt, “Ferrite nucleation and growth during continuous cooling”, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 27, No. 6, pp. 1547-1556, 1996.

[19] H. N. Han & S. H. Park, “Model for cooling and phase transformation behaviour of transformation induced plasticity steel on runout table in hot strip mill”, Materials Science and Technology, Vol. 17, No. 6, pp. 721-726, 2001.

[20] D. Liu, F. Fazeli & M. Militzer, “Modeling of microstructure evolution during hot strip rolling of dual phase steels”, ISIJ International, Vol. 47, No. 12, pp. 1789-1798, 2007.

[21] M. Militzer, E. B. Hawbolt & T. R. Meadowcroft, “Microstructural model for hot strip rolling of high-strength low-alloy steels”, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 31, No. 4, pp. 1247-1259, 2000.

[22] S. Sarkar & M. Militzer, “Microstructure evolution model for hot strip rolling of Nb-Mo microalloyed complex phase steel”, Materials Science and Technology, Vol. 25, No. 9, pp. 1134-1146, 2009.

[23] M. Umemoto, N. Komatsubara & I. Tamura, “Prediction of hardenability effects from isothermal transformation kinetics”, Journal of Heat Treating, Vol. 1, No. 3, pp. 57-64, 1980.

 [24] J. Moon, S. Kim, H. Jeong, J. Lee & C. Lee, “Influence of Nb addition on the particle coarsening and microstructure evolution in a Ti-containing steel weld HAZ”, Materials Science and Engineering, Vol. 454-455A, pp. 648-653, 2007.